Torque sensor is mainly used to measure all kinds of torque, speed and mechanical efficiency. It will change the torque into electrical signals. Its accuracy is related to the accuracy of the test system. Its main characteristic lies in that it can measure both static torque and rotational torque, namely dynamic torque. Let's have a brief understanding of the commonly used torque sensors. Non-cont...

The technology of torque sensor has become more and more mature. But in fact its development has gone through three stages. The first stage is the generation of measurement technology. In 1678, Robert Hooke described Hooke's law of proportionality between material elongation and associated material tension. Moreover, the advent of bridge circuits enables small changes in voltage to be measured. Th...

Strain gauge sensors are generally made of four wires (except shielded wires). As far as sensors are concerned, they are usually red, black, green and white. Red and black for power positive and negative (excitation). Green and white signal positive and negative (output). Use a multimeter to measure the impedance between the red line and the black line, and the impedance between the gree...

Torque sensors are used in a wide range of applications. Torque force is determined by two points: measuring torque sensor force and measuring speed. Torque sensors are not common in our daily life, but their application is very important. A reaction torque sensor in the car checks the torsion of the torsion bar and converts it into an electrical signal. This electrical signal is transmitted to th...

1、The material of the elastomer   The elastomer material of the force sensor is usually made of metal. Most of the available materials are aluminum alloy material, alloy steel material and stainless steel material. The alloy material not only has stiffness to ensure deformation consistency and deformation recovery, but also has good weather resistance and corrosion resistance. The main requir...

The general parameters of the force sensor are the technical parameters of the sensor, including the most important range, sensitivity, accuracy index, excitation voltage, input and output resistance, wiring definition and so on. For a user who has never used a force transducer, how to do post signal processing? In general, the principle of strain type sensor is wheatstone bridge. From the wiring ...

Torque sensors can be mounted horizontally or vertically. Power equipment, torque transducer, load equipment should be installed on a stable basis to avoid excessive vibration, otherwise there may be data instability, reduce the measurement accuracy, and even damage the sensor. We try to use elastic pin couplings or rigid couplings during installation. During installation, the concentricity of the...

In the multi-axis sensors, we often come into contact with 3 axis sensor. With the advent of industrial intelligence era, product technology has been updated and changed. Let's first understand the working principle and characteristics of the three-dimensional force sensor. The working principle of the three-dimensional force sensor: The three-dimensional force sensor adopts the principle of resis...