Torque sensor is mainly used to measure all kinds of torque, speed and mechanical efficiency. It will change the torque into electrical signals. Its accuracy is related to the accuracy of the test system. Its main characteristic lies in that it can measure both static torque and rotational torque, namely dynamic torque. Let's have a brief understanding of the commonly used torque sensors. Non-cont...

The technology of torque sensor has become more and more mature. But in fact its development has gone through three stages. The first stage is the generation of measurement technology. In 1678, Robert Hooke described Hooke's law of proportionality between material elongation and associated material tension. Moreover, the advent of bridge circuits enables small changes in voltage to be measured. Th...

Strain gauge sensors are generally made of four wires (except shielded wires). As far as sensors are concerned, they are usually red, black, green and white. Red and black for power positive and negative (excitation). Green and white signal positive and negative (output). Use a multimeter to measure the impedance between the red line and the black line, and the impedance between the gree...

Torque sensors are used in a wide range of applications. Torque force is determined by two points: measuring torque sensor force and measuring speed. Torque sensors are not common in our daily life, but their application is very important. A reaction torque sensor in the car checks the torsion of the torsion bar and converts it into an electrical signal. This electrical signal is transmitted to th...

Torque sensors can be mounted horizontally or vertically. Power equipment, torque transducer, load equipment should be installed on a stable basis to avoid excessive vibration, otherwise there may be data instability, reduce the measurement accuracy, and even damage the sensor. We try to use elastic pin couplings or rigid couplings during installation. During installation, the concentricity of the...

In the multi-axis sensors, we often come into contact with 3 axis sensor. With the advent of industrial intelligence era, product technology has been updated and changed. Let's first understand the working principle and characteristics of the three-dimensional force sensor. The working principle of the three-dimensional force sensor: The three-dimensional force sensor adopts the principle of resis...

In recent years, with the rapid development of the medical equipment market, pressure sensors are more widely used in the medical industry. The sensor has higher requirements, such as high precision, high reliability, stability, small volume and so on.  Let's summarize the application of pressure load cells in the medical industry: 1. Force sensor applied to infusion pump to ensure that the p...

Torque sensors are divided into static torque sensors (rotation cannot exceed 360 degrees) and dynamic torque sensors. Static torque can be measured in both static and dynamic torque sensors. Static torque sensor is selected for cost consideration. If you measure the torque when the equipment is working dynamically, you can only choose the dynamic torque sensor to measure. Hefei Natural Intel...